WUKO Lock’n’Roller 1040/1042

WUKO Lock’n’Roller 1040/1042

seaming
single-lock standing seam
WUKO Lock’n’Roller 1040/1042

Tool for closing the single-lock standing seam

New model 1042 for a wider profile! 

Made in Austria

Locking by Rolling!

WUKO Lock’n’Roller 1040
Lock’n’Roller 1040

Details

  • Closes the profile in both directions
  • Clever system of eccentric lever with disc springs
  • adjustment of the pressure if necessary > clean and precise result regardless of material
  • Simple removal of the tool from seam by relieving pressure – at any time and without scratching
  • Ergonomic handholds above and on both sides of the tool
  • Forming rollers of stainless steel
  • Rope-tying device included
  • Carrying case included
WUKO 1040
WUKO Lock’n’Roller 1040
WUKO Lock’n’Roller 1040 doing sidings
1042 Lock'n'Roller Maxi

Videos

How it’s done

  • Close a short piece of seam e.g. with pliers
  • Place the WUKO Lock’n’Roller on the seam, adjust to seam width, fix with wing screws
  • Move the WUKO Lock’n’Roller forward (using handholds, handle bars or rope)
  • If necessary increase or reduce contact pressure with the eccentric lever

Removing the WUKO Lock’n’Roller from the seam:

  • drive out at the end of the seam at any time by opening the eccentric lever (relieving of pressure) and loosening the wing screws
  • bring back to the beginning of the seam

Technical data

NameValue
Maximum sheet metal thickness galvanized steel0.65 mm / 24 ga
Maximum sheet metal thickness aluminum, copper, zinc0.80 mm / 20 ga
Maximum sheet metal thickness stainless steel0.50 mm / 26 ga
Model 1040: Profile Width12–15 mm / ½” -¹⁹∕₃₂″
Model 1042: Profile Width19-23 mm / ¾” – ⅞”
Tool length270 mm / 10.6″
Model 1040: Weight2.9 kg / 5 lbs
Model 1042: Weight4.4 kg / 6.2 lbs

For specialists: Batten Seam

Just combine two holders of forming rollers.

Example 1
Example 2

Any questions?

Just ask!